부품 정보
4 bolt holes 0.560 in dia; 2 rounded corners along width
TXT
묘사:
Laminated Shim Stock
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.380 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
4.000 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.0620 inches
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.002 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Brass, astm b36, alloy 260, temper h01 (1/4 hard)
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Brass, astm b36, alloy 260, temper h01 (1/4 hard)
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
19207-10894579 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
