TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Drive
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.150 inches and 0.175 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.210 inches and 0.220 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
1.440 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.502 inches and 0.503 inches
Under Head Length:
2.770 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.249 inches and 0.251 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.250 inches and 0.255 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
70.4 rockwell a and 73.6 rockwell a
Pin Chamfer Angle:
15.0 degrees
Pin Head Diameter:
Between 0.812 inches and 0.813 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmz
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1035 and steel comp 1045
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
