MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.675 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
0.045 inches
Relief Under Head Diameter:
0.172 inches
Relief Under Head Length:
0.046 inches
First Step Diameter:
0.250 inches
First Step Length:
0.087 inches
Second Step Diameter:
0.1245 inches
Second Step Length:
0.052 inches
Third Step Diameter:
0.097 inches
Third Step Length:
0.030 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Slot
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
M18
Pin Head Diameter:
0.1245 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.118 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, class 416, cond a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
