MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Tongue rounded ends
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Tongue and cross drilled hole
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 12.110 inches and 12.130 inches
First End Tongue Thickness:
Between 0.088 inches and 0.090 inches
First End Tongue Width:
Between 0.370 inches and 0.375 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.3700 inches and 0.3750 inches
Second End Tongue Thickness:
Between 0.088 inches and 0.090 inches
Second End Tongue Width:
Between 0.495 inches and 0.500 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4950 inches and 0.5000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.1380 inches
Second End Distance From Hole Center To End:
0.374 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.123 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
1
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.300 inches and 0.310 inches
First End Step Length:
Between 0.250 inches and 0.260 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
Second End Step Length:
Between 0.210 inches and 0.220 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Telescope
