부품 번호 105-01208

Fluid Passage Bolt

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards
부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
105-01208
비무장화:
No
수명:
측정 단위:
NIIN:
007201251

부품 정보
Low flow

NSN
국가 주식 번호:
4730-00-720-1251 4730007201251
TXT
묘사:
Fluid Passage Bolt
INC
INC
아이템 이름 코드:
18683
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Body wrenching
MRC:
None.AAWX
Concentric Hole Depth:
1.937 inches
MRC:
None.AAXC
Concentric Hole Diameter:
0.203 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.532 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Plain
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A narrative description of the type of end connection.ACLS
Second End Connection Type:
Threaded external tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACLT
Second End Style Designator:
Flared
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACMR
Second End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.000 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.216 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATLF
Second End Thread Length:
0.657 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
MRC:
None.BBKL
First Diameter From Wrenching Feature:
0.363 inches
MRC:
None.BBKM
Second Diameter From Wrenching Feature:
0.499 inches
MRC:
None.BBKN
Third Diameter From Wrenching Feature:
0.363 inches
MRC:
None.BBKP
Fourth Diameter From Wrenching Feature:
0.499 inches
MRC:
None.BBKQ
Fifth Diameter From Wrenching Feature:
0.363 inches
MRC:
None.BBKR
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.052 inches
MRC:
None.BBKS
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
0.354 inches
MRC:
None.BBKT
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
0.725 inches
MRC:
None.BBKW
Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter:
1.087 inches
MRC:
None.BBKX
Length From Bearing Surface Of Wrenching Feature To End Of Fifth Diameter:
1.222 inches
MRC:
None.BBKY
First Radial Fluid Hole Diameter:
0.189 inches
MRC:
None.BBLB
Distance From First Radial Hole Center To End Of Bolt:
0.898 inches
MRC:
None.BBLD
Length From Bearing Surface Of Wrenching Feature To Bolt End:
1.438 inches
MRC:
None.BBLF
Wrenching Feature Height:
0.437 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.438 inches
MRC:
The angle of the end surface upon which the mated surface seats.CRCN
Second End Seat Angle:
37.0 degrees
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CRMX
Second End Thready Qty Per Inch (tpi):
16
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CRNB
Second End Thread Size:
0.750 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CRPF
Second End Thread Series Designator:
Unf
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-268, t4 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2, cl 2 military specification single treatment response

{lang[cimilar]} Fluid Passage Bolts

« Hose, Pipe, Tube, Lubrication and Railing Fittings {lang[catalog]}
지금 비교»
맑다 | 숨기다