부품 정보
Female; burst pressure 163 psig; operating temp range neg 40 degrees f to 160 degrees f; separation force 18 plus minus 2 lbs; 1st end diameter 0.86 in; 2nd end per ms33656e4 or as4395e0y
TXT
묘사:
Quick Disconnect Coupling Half
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.380 inches
MRC:
The hue or tint of the exterior of the item.ADJS
Exterior Color:
Green
MRC:
The specific mating coupling half with which the item must connect.ADLT
Mating End Identification:
Air-lock, coupling half, quick disconnect, part no. C20745-1
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F16aircombfit; w/s aircraft, f-16
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Self-sealing
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6 federal specification single material response or ams 412 assn standard single material response or ams 4152 assn standard single material response body
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize body
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Subject to combined low temperature qualification test
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 military specification single treatment response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Male coupling half
