TXT
묘사:
Plug-in Electronic Compon Socket
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Brass
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Top mount
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.800 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
0.0 degrees celsius and 65.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.290 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.400 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.017 inches and 0.023 inches
Body Mounting Hole Accommodation Length:
0.110 inches
Body Mounting Hole Accommodation Width:
Between 0.017 inches and 0.023 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting hole(s).AEVB
Mounting Hole Style:
Rectangular, w/four mounting holes/slots
MRC:
The opposition to the flow of current through mating contacts of an item,expressed in ohms.AFDM
Contact Resistance In Ohms:
0.015
MRC:
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.AFRC
Contact Maximum Current Rating In Amps:
3.0
MRC:
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.AFRG
Contact Material:
Beryllium copper
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the contact surface.AFRH
Contact Surface Treatment:
Gold and nickel
MRC:
The number of contacts accommodated by the item.AFRL
Accommodated Contact Quantity:
16
MRC:
The rated ohmic value of the resistor/s/ furnished with the item.AGUN
Resistor Rating:
0.015 ohms and 20.0 megohms
Center To Center Distance Between Outside Mounting Holes Along Length:
0.800 inches
Center To Center Distance Between Outside Mounting Holes Along Width:
0.300 inches
MRC:
The arrangement of holes in a printed circuit board provided to accommodate terminals,polarization pin,and/or center shield.AKWJ
Printed Circuit Board Hole Arrangement Style:
Ten hole dimension "a" 0.300 inch
MRC:
The means of attaching a component shield.AKWK
Component Shield Mounting Method:
Force fit
MRC:
Indicates the type of polarization used to prevent mismating.AKWN
Polarization Type:
Contact size
Projection Length Above Mounting Surface:
0.105 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Press fit
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Printed circuit or chassis
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact positions.CRPY
Contact Position Arrangement Style:
Dual in-line
MRC:
The maximum potential,expressed in volts,and the current type that may be applied continuously to the contacts without damage.CSKW
Contact Maximum Voltage In Volts And Current Type:
1200.0 ac
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Internal surfaces gold
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
16 solder stud
