MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.970 inches and 2.030 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.100 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 6.970 inches and 7.030 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.179 inches all holes and 0.185 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
8
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Threaded
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
There are four holes with two at each end and they are located 0.310 inches with a varation of plus or minus 0.030 inches and 1.000 inch between bsc along the width, the two holes at each end have 6.735 inches between bsc; the four holes in line are located 1.000 inch bsc from the side and 0.500 inch bsc from four holes in line and two holes at each end, the first hole is 0.988 inches bsc from left end holes, the second hole is 2.588 inches bsc from left end holes, the third hole is 4.188 inches bsc from left end holes, the fourth hole is 5.488 inches bsc from left end holes; the holes are all csk 100 degrees to a diameter of 0.337 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2, cl 1 military specification single treatment response
