부품 정보
Slot in first leg 3.125 in. By 0.218 in. W
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Any acceptable
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.125 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.250 inches
Second Leg Width:
4.125 inches
First Leg Hole Diameter:
0.343 inches
Second Leg Hole Diameter:
Between 0.253 inches and 0.262 inches
Second Leg Distance Between Lower Hole Centers Along Width:
3.125 inches
Second Leg Distance Between Hole Centers Along Length:
0.312 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
1.562 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.500 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.438 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.118 inches and 0.132 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.118 inches and 0.132 inches
First Leg Width:
4.125 inches
First Leg Corner Radius:
0.375 inches
First Leg Distance Between Hole Centers Along Width:
3.125 inches
First Leg Distance Between Lower Hole Centers Along Width:
0.156 inches
First Leg Distance Between Hole Centers Along Length:
0.438 inches
First Leg Distance From Edge To Hole Center Along Width:
0.500 inches
First Leg Distance From Edge To Hole Center Along Length:
0.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Three holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6063
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
