부품 정보
Flanged end is hex; hex end has a countersunk hole 0.120 diam x 0.380 deep; opposite end is countersunk 82 degrees to 0.140 diam
TXT
묘사:
Spacing Threaded Standoff
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b left internal (includes through thread)
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand left internal (includes through thread)
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.000 inches left internal (includes through thread)
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.190 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.190 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
0.810 inches
MRC:
The shortest straight line between flats, perpendiculiar to the height of the flange.AFGG
Flange Width Across Flats:
0.190 inches
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
40 left internal (includes through thread)
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.112 inches left internal (includes through thread)
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024 or aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6, t4 federal specification 1st material response and qq-a-225/8, t6 federal specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flanged
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc left internal (includes through thread)
