부품 정보
Clamp, under hull 1
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.22 inches and 4.32 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.31 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.45 inches and 1.55 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.370 inches and 0.380 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
Between 0.745 inches and 0.755 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2430-01-581-8572
Center To Center Distance Between First And Second Mounting Holes:
Between 3.639 inches and 3.649 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
Between 0.95 inches and 1.05 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.640 inches first hole
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.820 inches second hole
Distance From End To First Mounting Hole Center:
Between 0.307 inches and 0.317 inches
Distance From End To First Clamping Hole Center:
Between 0.940 inches and 0.950 inches
Center To Center Distance Between First And Second Clamping Holes:
Between 0.975 inches and 0.985 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item consists of (2) 10004p0429-001 material is black or white polypropylene and (1) 10004p0429-002 material is steel with chemical agent resistant coating (carc) per mil-dtl-53702, with a top coat per mil-dtl-64159 green 383 color no. 34094. The steel plate is to be mounted on the top of the (2) polypropylene parts.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polypropylene and steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a36 assn standard 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
