부품 정보
One side of both center section and 2nd leg are bent down at 90%. The measurements above fit the flat pattern. After the bend, both of these sections will be 1.75 inch wide.
TXT
묘사:
Double Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.75 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.11 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2430-01-581-8572
Second Leg Width:
2.17 inches
Second Leg End Width:
1.99 inches
First Leg Hole Diameter:
0.375 inches
Second Leg Hole Diameter:
0.578 inches
Second Leg Distance From Edge To Hole Center Along Width:
1.666 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.587 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.125 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.125 inches
Center Section Height:
1.27 inches
Center Section Width:
2.17 inches
Center Section Thickness:
0.125 inches
First Leg Width:
1.50 inches
First Leg End Width:
1.32 inches
First Leg Distance From Edge To Hole Center Along Width:
0.633 inches
First Leg Distance From Edge To Hole Center Along Length:
0.845 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
60.0 degrees
Second Leg Angle:
60.0 degrees
First Leg Chamfer Angle:
45.0 degrees
Second Leg Chamfer Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double angle
