부품 정보
Connection end type, first end: hub; connection end type, second end: shaft
TXT
묘사:
Nonvehicular Universal Joint
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Err-070
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.172 inches and 2.203 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.618 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.620 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
Err-070
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Err-070
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
Err-070
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
Err-070
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
Err-070
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
1.091 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
1.097 inches
MRC:
The length of a straight line which passes through the center of an unthreaded securing hole,and terminates on the inside circumference.AMBG
Unthreaded Securing Hole Diameter:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-070
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
Err-070
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
Err-070
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Err-070
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Err-070
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
0.300 in.From hub end through hub in line with one spline tooth and one tooth space
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Err-070
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
Err-070
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Err-070
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Shaft Facility Spline Quantity:
11
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
