MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 1.563 inches and 1.573 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.376 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 0.495 inches and 0.505 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
0.688 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.062 inches and 1.063 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
0.688 inches
MRC:
The radius of the end surface upon which the mated surface seats.AJFZ
Seat Radius:
Between 0.151 inches and 0.161 inches
Flange Seat To Disk End Height:
0.477 mils and 0.483 centimeters
Under Flange Height:
Between 1.329 inches and 1.335 inches
MRC:
The physical configuration of the surface of the seat.CQKM
Seating Surface Shape:
Radial
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rod, welding, surfacing face
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-17131, type mil-rcocr-a military specification single material response face
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-853, class 3, type a military specification single material response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain flanged
