부품 정보
One internal flat key located at 90 degrees angle to external keys 0.114 in. Min, 0.11l in. Maximum width, 0.118 in. Min, 0.123 in. Maximum lg
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.328 inches and 0.333 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.568 inches
Tapered Key Major Width:
0.145 inches
MRC:
The measurement from one flat surface of the key to the opposite flat surface.ABLJ
Internal Straight Key Width:
Between 0.114 inches and 0.116 inches
Overall Distance Including Keys:
0.714 inches
Split Key Length:
Between 0.157 inches and 0.177 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.027 inches and 0.035 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
76.0 rockwell superficial 30-t
Angle Between External Keys:
60.0 degrees
External Prebent Key Angle:
Between 20.0 degrees and 40.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Key
