TXT
묘사:
Fluid Passage Bolt
Extended Washer Diameter:
0.420 inches
Concentric Hole Depth:
0.560 inches
Concentric Hole Diameter:
Between 0.062 inches and 0.064 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.990 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACMR
Second End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.367 inches and 0.376 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Extended washer
First Diameter From Wrenching Feature:
Between 0.240 inches and 0.250 inches
Second Diameter From Wrenching Feature:
0.160 inches
Third Diameter From Wrenching Feature:
Between 0.247 inches and 0.248 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.090 inches and 0.100 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
0.710 inches
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
0.810 inches
First Radial Fluid Hole Diameter:
Between 0.022 inches and 0.027 inches
Second Radial Fluid Hole Diameter:
Between 0.022 inches and 0.027 inches
Distance From First Radial Hole Center To End Of Bolt:
0.510 inches
Distance From Second Radial Hole Center To End Of Bolt:
0.450 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
0.810 inches
Wrenching Feature Height:
0.180 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 18.0 rockwell c and 26.0 rockwell c
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CRMX
Second End Thready Qty Per Inch (tpi):
24
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CRNB
Second End Thread Size:
0.3125 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CRPF
Second End Thread Series Designator:
Unf
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5613 assn standard single material response
