부품 번호 0N300902

Gasket

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 9.32 and 12.582 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
0n300902
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
011395046

부품 정보
Within gasket is another rectangle with 2 sides common to gasket; length 5.225 in n/m, width 1.867 in nom; aperture length 4.765 in nom, aperture width 1.407 in nom; inner corner rad .12 in nom; 6th bolt slot center is 4.740 in nom from bolt slot center on one side and 3.98 in nom from bolt slot center on other side; bolt slot is .187 in wide; two sides within gasket not common to outer gasket are .180 in nom wide

NSN
국가 주식 번호:
5330-01-139-5046 5330011395046
TXT
묘사:
Gasket
INC
INC
아이템 이름 코드:
04522
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.180 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.620 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.430 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.120 inches
MRC:
None.ADPW
Outside Corner Radius:
0.120 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
2.870 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
9.060 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
5.170 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
0.450 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicon top
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular

{lang[cimilar]} Gaskets

« Packing and Gasket Materials {lang[catalog]}
지금 비교»
맑다 | 숨기다