MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
6.960 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
5.960 inches
MRC:
The number of holes provided to attach the cover.AELW
Cover Mounting Hole Quantity:
8
MRC:
An inside measurement between specified points of an item,in distinction from height.AFEF
Inside Depth:
0.590 inches
MRC:
The number of entrances provided on the item.AFEQ
Entrance Quantity:
6
MRC:
Indicates the type of cover as distinguished by its particular design.AFER
Cover Type:
Flat
MRC:
The physical configuration and number of openings included in the cover.CRQZ
Cover Opening Shape And Quantity:
6 square
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-f-14072, finish no. E513 per ordnance specification os11773, color no. 26250, fed std-595 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square-two gang box
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
98230-0n149630 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
