측정 단위:
* special requirements. EA
부품 정보
4 holes on 8 in.Bolt circle located on verticalcenter line 90 degrees apart; 12 holes on 6-1/2 in. Bolt circle 0.314 in.Min.0.320 in.Max.Located 15 deg.From vertical center line 30 deg.Apart; 12 holes on 5-1/2 in.Bolt circle 0.314 in.Min. 0.320 max.Located on vertical center line 30 deg.Apart; flexdb; matldas0000; bolt hole included
TXT
묘사:
Nonvehicular Clutch Disk
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
Between 16.719 inches and 16.750 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.120 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.094 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.203 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
Indicates the location of the item to which a specific material is applicable.AQQF
Material Location:
Both sides
MRC:
The physical configuration of the item.ARJD
Design Form:
Solid
MRC:
The spacing in the arrangement of the bolt holes.AZFF
Bolt Hole Spacing:
8 in.Bolt circle dia; 6-1/2 in.Bolt circle dia; 5-1/2 in.Bolt circle dia
MRC:
Indicates the type of disk.BPLM
Disk Type:
Plain
MRC:
Indicates the type of asbestos composition provided.BSPF
Asbestos Composition Type:
Woven
MRC:
The length of a straight line which passes through the center of the material,and terminates at the outside circumference.BSPG
Material Outside Diameter:
Between 16.719 inches and 16.750 inches
MRC:
The length of a straight line which passes through the center of the material,and terminates at the inside circumference.BSPH
Material Inside Diameter:
Between 11.250 inches and 11.281 inches
MRC:
The means by which the facing is attached.BSPL
Facing Attachment Method:
Bonded
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Friction material facing
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.CYBJ
Disk Material:
Steel
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
4 holes on 8 in.Bolt circle located on verticalcenter line 90 degrees apart; 12 holes on 6-1/2 in. Bolt circle 0.314 in.Min.0.320 in.Max.Located 15 deg.From vertical center line 30 deg.Apart; 12 holes on 5-1/2 in.Bolt circle 0.314 in.Min. 0.320 max.Located on vertical center line 30 deg.Apart; flexdb; matldas0000; bolt hole included; asbestos composition: woven
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Asbestos
