부품 정보
Inavy: panel, faceplate; dwg: panel assembly c-2a cns/atm
TXT
묘사:
Electrical-electro Control Panel
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.688 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.063 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.207 inches and 0.253 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-2a aircraft
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
04313383-2, panel, 0.230x0.060x5.690, 1; ms3498-8, grommet assembly, 2; ms90335-7, plug, 1
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
2 ms3498-8 grommet assembly, 1 at each short end
MRC:
The element,compound,or mixture of which the panel is fabricated,excluding any surface treatment.ANJG
Panel Material:
Plastic
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Has 3 holes, 0.500 in. Dia, c'bd 0.687 x 0.125in, one at center of panel, the others centered 1.500 in. To either side of center hole; left hole labelled "cdu" above hole and "pilot" below; center hole labelled "rad alt" above hole; right hole labelled "cdu" above hole and "copilot" below; between each hole, there are labels "on" above label "off" ms90335-7 plug is centered between left and center holes and is centered 0.782 in. From top edge of panel
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Plastic to be class i-nvis green a, type iv per specification sae as7788; lighting shall be iaw mil-l-85762 type 1, class a
