부품 정보
Item slotted along length 3.500 in. From one end; slot square 1.250 in. Nom on each side
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
Not rated
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
3500 pounds per square inch
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.250 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.120 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
13.620 inches
MRC:
The maximum load which can be applied normally to the plane of the material,per unit of cross-sectional area,that an item can withstand without fracture.ADZB
Flexural Strength:
6000 pounds per square inch
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Gray
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, acrylonitrile butadiene-styrene copolymer, mil-p-19904, grade fr or plastic, acrylonitrile butadiene-styrene copolymer, mil-p-19904, grade sb
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic, acrylonitrile butadiene-styrene copolymer, mil-p-19904, grade fr or plastic acrylonitrile-butadiene-styrene (abs)
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-19904, grade sb military specification 2nd material response
