부품 정보
Gasket, fuel system
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 117.6 millimeters and 118.4 millimeters
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.125 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 110.6 millimeters and 111.4 millimeters
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 78.6 millimeters and 79.4 millimeters
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 85.6 millimeters and 86.4 millimeters
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.125 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
14
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6115-01-561-7718 generator set, diesel engine
Smallest Bolt Hole Diameter:
Between 5.5 millimeters and 5.8 millimeters
Largest Bolt Hole Diameter:
Between 8.9 millimeters and 9.2 millimeters
Outside Edge To Inside Edge Smallest Distance Along Width:
Between 15.6 millimeters and 16.4 millimeters
Outside Edge To Inside Edge Smallest Distance Along Length:
Between 15.6 millimeters and 16.4 millimeters
Smallest Bolt Hole Quantity:
6
Largest Bolt Hole Quantity:
8
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6855, class 1, buna-n material military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
