TXT
묘사:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.375 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.938 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.594 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
1.4237 inches first end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.314 inches second end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.375 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.1660 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.1950 inches first end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.3753 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.7500 inches second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered first end
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Nuts 6
MRC:
Indicates the design type of the item.APGF
Design Type:
Disk
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 first end
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 second end
MRC:
The angle at which the keying facility(ies) is spaced,expressed in degrees.BSGJ
Keying Facility Spacing In Deg:
60.0 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole both ends
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
6 both ends
MRC:
Indicates the location of an unthreaded hole on the item.BSNW
Unthreaded Hole Location:
Both ends: equally spaced 3.156 in. Bolt circle
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and exposed coupling bolt type
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
1.6425 inches first end
