부품 정보
Tongue lg on shaft end 0.390 in., 5/8-18unf-2a threads also on shaft end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.750 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
16
MRC:
The length of a straight line which passes through the center of a gear,and terminates at the outside circumference.AJWS
Gear Outside Diameter:
2.250 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Tongue rounded sides and circular grooved, cross drilled unthreaded
MRC:
The number of teeth per inch of pitch diameter.AQGH
Diametral Pitch:
8
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.000 inches
MRC:
Indicates the type of shaft included on the item.CRSJ
Shaft Type:
Shouldered
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
25.0000 degrees
MRC:
The chemical compound or mechanical mixture properties of which the shaft is fabricated.CYEQ
Shaft Material:
Steel comp e4340 or steel comp 4140
MRC:
The chemical compound or mechanical mixture properties of which the gear is fabricated.CYER
Gear Material:
Steel comp e4340 or steel comp 4140
MRC:
The numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale and its location.CYES
Hardness Rating And Location:
36.0 rockwell c and 40.0 rockwell c
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the largest circumference.CYET
Shaft Largest Diameter:
1.000 inches
MRC:
Indicates the location of the gear on the shaft.CYEU
Gear Location On Shaft:
On end of shaft
MRC:
Designates the size of the shaft end included on the item.CYEW
Shaft End Size:
0.156 inches
