TXT
묘사:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Standard element
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.000 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
Indicates the type of heat control included on the item.ABJM
Heat Control Type:
Thermostat
MRC:
The minimum and maximum temperature ratings through which the thermostat will operate.ABJN
Thermostat Range:
+40.0 to 50.0 degrees fahrenheit
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Wire lead
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
8.000 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
The heat output of the heated portion of the surface area of the heating element.ABNS
Watt Density Rating:
6.0 per square inch single voltage
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cylinder, hyd
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
50.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
1
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
120.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Single single voltage
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Heater is 0.055 inch thick; lead insulation is type e polytetrafluoroethylene
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper resistance wire
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicone rubber resistance wire embedding/support insulation
