부품 정보
Manufacturers name: servoactuator; electircal input solenoid 28 vdc, synchro transformer input 25 vac, 400 hz, servo rated current +/- 15 ma at 30 v; centering force 25 lbs ; load limiter vales set to limit ouput force to 420-500 lbs; operating medium mil-h-5606 hydraulic fluid; operating pressure 3000 psi pressure port and 1000 psi return port; proof pressure 4500 psi pressure port and 1500 psi return port; burst pressure 7500 psi pressure port and 2500 psi return port; actuator bore diameter 0.837 to 0.839 inch, actuator rod diameter 0.621 to 0.622 inch; actuator effective area 0.248 sq inch
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Unthreaded mounting holes
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.030 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.410 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.837 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.839 inches
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
9.040 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
9.540 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Three hole
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.266 inches
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.274 inches
Center To Center Distance Between Mounting Provisions:
1.000 inches
Center To Center Distance Between Mounting Provisions:
3.350 inches
