부품 정보
Cable assembly, sp elec-branched pylon csed
MRC:
A measurement of the longest dimension of an item,in distinction from width.AAJU
Overall Length:
45.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.750 inches all conductors
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
0.930 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Connector 1st end all conductors
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Connector 2nd end all conductors
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the terminal lug.CXFY
Terminal Lug Style:
Straight w/mounting hole 1st end all conductors
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the terminal lug.CXFY
Terminal Lug Style:
Straight w/mounting hole 2nd end all conductors
MRC:
The identifying reference number assigned to the terminal(s) by the manufacturer.CXGG
Terminal Manufacturer Identifying Reference Number:
Ms27467t25b35p 1st end all conductors
MRC:
The identifying reference number assigned to the terminal(s) by the manufacturer.CXGG
Terminal Manufacturer Identifying Reference Number:
Ms27467t25b4s 2nd end all conductors
MRC:
The five-position commercial and government entity code for the manufacturer of the terminal.CXGN
Terminal Commercial And Government Entity Code:
96906 1st end all conductors
MRC:
The five-position commercial and government entity code for the manufacturer of the terminal.CXGN
Terminal Commercial And Government Entity Code:
96906 2nd end all conductors
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Applicable standards: /specifications: mil-sd-100 and ansi y14.5m-1982.All connector master key, (p1, p5) are aligned (12: 00).Drawing number 042974, cage code 90073.
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Per mil-n-13231 group ii by hot stamp transfer transfer method employing a permanent black material.In condensed gothic characters 0.25 inches (6.35mm) min height
