TXT
묘사:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.391 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.312 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
8.000 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.625 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.3280 inches second end
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
3/8-16unc-2b second end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
4.0000 inches first end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.5020 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
2.8750 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.5000 inches first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Double disk
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 second end
MRC:
The angle at which the keying facility(ies) is spaced,expressed in degrees.BSGJ
Keying Facility Spacing In Deg:
0.0 second end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
2 second end
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Second end: in-line 0.500 and 1.375 in. From edge
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
8 first end
MRC:
Indicates the location of an unthreaded hole on the item.BSNW
Unthreaded Hole Location:
First end: equally spaced on 7.250 in. Bc on flange
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and exposed coupling bolt type
