MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
22.250 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
15.512 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
0.411 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.750 inches
Outer Bolt Circle Diameter:
20.669 inches
Inner Bolt Circle Diameter:
16.771 inches
Outer Bolt Circle Hole Diameter:
0.081 inches
Inner Bolt Circle Hole Diameter:
0.312 inches
MRC:
A measurement from the bottom to the top surface of a raised face,in distinction from depth.AJED
Raised Face Height:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Raised and recessed face, raised neck
MRC:
The number of holes provided on the outer bolt circle of the item.AJEN
Outer Bolt Circle Hole Quantity:
12
MRC:
The number of holes provided on the inner bolt circle of the item.AJEP
Inner Bolt Circle Hole Quantity:
16
MRC:
The condition of the face seating surface of an item which contacts another surface.AKWE
Face Seating Surface Condition:
Machined
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round, two bolt hole circles
