Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130
Identify in accordance with mil-std-130; fastener finish dacrotized plus bright metallic organic coating
Material 12 thk 302 stainless steel; p/n 9454407 in accordance with mil-std-130; contains a 2nd mounting hole diameter of min. 0.125, max0.130
Item is a torlon countersunk flat head machine screw; material: general-purpose polyamide-imide (torlon) grade 4203 = extruded rod, and 4203l = injection molded; workmanship - screws shall show no evidence of cross threading or multilation; thread length - full form threads shall extend to within two threads of the bearing surface of the head or closer if practicable; marking shall be in accordance with mil-std-130; quality assurance provisions
Item is a torlon countersunk flat head machine screw; material: general-purpose polyamide-imide (torlon) grade 4203 = extruded rod, and 4203l = injection molded; workmanship - screws shall show no evidence of cross threading or multilation; thread length - full form threads shall extend to within two threads of the bearing surface of the head or closer if practicable; marking shall be in accordance with mil-std-130; quality assurance provisions
Mil-std-130 mil std single material response overall
Mil-std-130 mil std 1st material response nut or mil-std-454 mil std 2nd material response nut
Item identification apply the following markings to container in accordance with mil-std-130"19207-12446304"manufacturer's cage code
Mil-std-130 mil std single treatment response body
Parts marked per mil-std-130; head marking per nas1347, type ii
Plate has an additional 4 apertures with a diameter of .290 - .320 inches thru, metal stamp. Engrave. Or electric are pencil on this surface in .09 - .50 high characters per mil-std-130
Wprotective finish per paragraph 24, exterior paint system, drawing 12350824, metal stamp, or electric arc pencil on this surface in .09-.50 high characters per mil-std-130; the diameter of the second aperture is .220 - .280 inches