부품 번호 19-01-1674

Metal Sheet
재고 가용성  제품 상태 코드

부품 번호 19-01-1674 다음과 같은 수량과 조건으로 재고가 있습니다.

  • NE: 12

참고: 이 항목의 가용성은 마지막으로 업데이트되었습니다. 12/02/2024 그 이후로 변경되었을 수 있습니다. 최신 가격 및 가용성에 대한 견적을 요청하십시오.

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 6956.976 and 9097.584 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
19-01-1674
비무장화:
No
수명:
N/A
측정 단위:
No qup SH
NIIN:
002777423

부품 정보
0.125 in. Perforation center to center distance along vertical axis

NSN
국가 주식 번호:
9535-00-277-7423 9535002777423
TXT
묘사:
Metal Sheet
INC
INC
아이템 이름 코드:
37015
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Cold rolled
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
36.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.000 feet
MRC:
None.ADPC
Distance From First Hole Centerline To End Along Length:
Any acceptable
MRC:
None.ADPD
Distance From First Hole Centerline To End Along Width:
Any acceptable
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.0620 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Various
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Round
MRC:
The length of a straight line which passes through the center of the opening,and terminates at the circumference.AKSV
Perforation Diameter:
0.062 inches
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Any acceptable
MRC:
None.BMNS
Perforation Center To Center Distance Along Upward Slope:
0.125 inches
MRC:
None.BMNT
Err Default:
Err default
MRC:
None.BMNT
Perforation Center To Center Distance Along Downward Slope:
0.125 inches
MRC:
The weight of the item with respect to a unit of measure.BRFD
Weight Per Unit Measure:
2.220 pounds per square foot
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
70000 pounds per square inch
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
28000 pounds per square inch
MRC:
None.CXKT
Err Default:
Err default
MRC:
None.CXKT
Hole Quantity:
8 per square inch
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
Annealed
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Nickel, qq-n-281, class a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification 1st material response
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Condition annealed and staggered centers and type 6

{lang[cimilar]} Metal Sheets

« Plate, Sheet, Strip and Foil; Nonferrous Base Metal {lang[catalog]}
지금 비교»
맑다 | 숨기다